Get started with Docker Machine and a local VM

Estimated reading time: 11 minutes

Let’s take a look at using docker-machine to create, use, and manage a Docker host inside of a local virtual machine.

Note

Docker Machine is no longer included in the Docker Desktop installer. You can download it separately from the docker/machine release page on GitHub.

Prerequisite information

With the advent of Docker Desktop for Mac and Docker Desktop for Windows, we recommend that you use these for your primary Docker workflows. You can use these applications to run Docker natively on your local system without using Docker Machine at all.

For now, however, if you want to create multiple local machines, you still need Docker Machine to create and manage machines for multi-node experimentation.

The new solutions come with their own native virtualization solutions rather than Oracle VirtualBox, so keep the following considerations in mind when using Machine to create local VMs.

  • Docker Desktop for Mac - You can use docker-machine create with the virtualbox driver to create additional local machines.

  • Docker Desktop for Windows - You can use docker-machine create with the hyperv driver to create additional local machines.

If you are using Docker Desktop for Windows

Docker Desktop for Windows uses Microsoft Hyper-V for virtualization, and Hyper-V is not compatible with Oracle VirtualBox. Therefore, you cannot run the two solutions simultaneously. But you can still use docker-machine to create more local VMs by using the Microsoft Hyper-V driver.

The prerequisites are:

If you are using Docker Desktop for Mac

Docker Desktop for Mac uses HyperKit, a lightweight macOS virtualization solution built on top of the Hypervisor.framework.

Currently, there is no docker-machine create driver for HyperKit, so use the virtualbox driver to create local machines. (See the Docker Machine driver for Oracle VirtualBox.) You can run both HyperKit and Oracle VirtualBox on the same system.

Use Machine to run Docker containers

To run a Docker container, you:

  • create a new (or start an existing) Docker virtual machine
  • switch your environment to your new VM
  • use the docker client to create, load, and manage containers

Once you create a machine, you can reuse it as often as you like. Like any VirtualBox VM, it maintains its configuration between uses.

The examples here show how to create and start a machine, run Docker commands, and work with containers.

Create a machine

  1. Open a command shell or terminal window.

    These command examples shows a Bash shell. For a different shell, such as C Shell, the same commands are the same except where noted.

  2. Use docker-machine ls to list available machines.

    In this example, no machines have been created yet.

     $ docker-machine ls
     NAME   ACTIVE   DRIVER   STATE   URL   SWARM   DOCKER   ERRORS
    
  3. Create a machine.

    Run the docker-machine create command, pass the appropriate driver to the --driver flag and provide a machine name. If this is your first machine, name it default as shown in the example. If you already have a “default” machine, choose another name for this new machine.

    On Docker Desktop for Windows systems that support Hyper-V, use the hyperv driver as shown in the Docker Machine Microsoft Hyper-V driver reference and follow the example, which shows how to use an external network switch and provides the flags for the full command. (See prerequisites above to learn more.)

         $ docker-machine create --driver virtualbox default
         Running pre-create checks...
         Creating machine...
         (staging) Copying /Users/ripley/.docker/machine/cache/boot2docker.iso to /Users/ripley/.docker/machine/machines/default/boot2docker.iso...
         (staging) Creating VirtualBox VM...
         (staging) Creating SSH key...
         (staging) Starting the VM...
         (staging) Waiting for an IP...
         Waiting for machine to be running, this may take a few minutes...
         Machine is running, waiting for SSH to be available...
         Detecting operating system of created instance...
         Detecting the provisioner...
         Provisioning with boot2docker...
         Copying certs to the local machine directory...
         Copying certs to the remote machine...
         Setting Docker configuration on the remote daemon...
         Checking connection to Docker...
         Docker is up and running!
         To see how to connect Docker to this machine, run: docker-machine env default
    

    This command downloads a lightweight Linux distribution (boot2docker) with the Docker daemon installed, and creates and starts a VirtualBox VM with Docker running.

  4. List available machines again to see your newly minted machine.

     $ docker-machine ls
     NAME      ACTIVE   DRIVER       STATE     URL                         SWARM   DOCKER   ERRORS
     default   *        virtualbox   Running   tcp://192.168.99.187:2376           v1.9.1
    
  5. Get the environment commands for your new VM.

    As noted in the output of the docker-machine create command, you need to tell Docker to talk to the new machine. You can do this with the docker-machine env command.

     $ docker-machine env default
     export DOCKER_TLS_VERIFY="1"
     export DOCKER_HOST="tcp://172.16.62.130:2376"
     export DOCKER_CERT_PATH="/Users/<yourusername>/.docker/machine/machines/default"
     export DOCKER_MACHINE_NAME="default"
     # Run this command to configure your shell:
     # eval "$(docker-machine env default)"
    
  6. Connect your shell to the new machine.

     $ eval "$(docker-machine env default)"
    

    Note: If you are using fish, or a Windows shell such as Powershell/cmd.exe, the above method does not work as described. Instead, see the env command’s documentation to learn how to set the environment variables for your shell.

    This sets environment variables for the current shell that the Docker client reads which specify the TLS settings. You need to do this each time you open a new shell or restart your machine. (See also, how to unset environment variables in the current shell.)

    You can now run Docker commands on this host.

Run containers and experiment with Machine commands

Run a container with docker run to verify your set up.

  1. Use docker run to download and run busybox with a simple ‘echo’ command.

     $ docker run busybox echo hello world
     Unable to find image 'busybox' locally
     Pulling repository busybox
     e72ac664f4f0: Download complete
     511136ea3c5a: Download complete
     df7546f9f060: Download complete
     e433a6c5b276: Download complete
     hello world
    
  2. Get the host IP address.

    Any exposed ports are available on the Docker host’s IP address, which you can get using the docker-machine ip command:

     $ docker-machine ip default
     192.168.99.100
    
  3. Run a Nginx webserver in a container with the following command:

     $ docker run -d -p 8000:80 nginx
    

    When the image is finished pulling, you can hit the server at port 8000 on the IP address given to you by docker-machine ip. For instance:

         $ curl $(docker-machine ip default):8000
         <!DOCTYPE html>
         <html>
         <head>
         <title>Welcome to nginx!</title>
         <style>
             body {
                 width: 35em;
                 margin: 0 auto;
                 font-family: Tahoma, Verdana, Arial, sans-serif;
             }
         </style>
         </head>
         <body>
         <h1>Welcome to nginx!</h1>
         <p>If you see this page, the nginx web server is successfully installed and
         working. Further configuration is required.</p>
    
         <p>For online documentation and support, refer to
         <a href="https://nginx.org">nginx.org</a>.<br/>
         Commercial support is available at
         <a href="https://www.nginx.com">www.nginx.com</a>.</p>
    
         <p><em>Thank you for using nginx.</em></p>
         </body>
         </html>
    

You can create and manage as many local VMs running Docker as your local resources permit; just run docker-machine create again. All created machines appear in the output of docker-machine ls.

Start and stop machines

If you are finished using a host for the time being, you can stop it with docker-machine stop and later start it again with docker-machine start.

    $ docker-machine stop default
    $ docker-machine start default

Operate on machines without specifying the name

Some docker-machine commands assume that the given operation should be run on a machine named default (if it exists) if no machine name is specified. Because using a local VM named default is such a common pattern, this allows you to save some typing on the most frequently used Machine commands.

For example:

      $ docker-machine stop
      Stopping "default"....
      Machine "default" was stopped.

      $ docker-machine start
      Starting "default"...
      (default) Waiting for an IP...
      Machine "default" was started.
      Started machines may have new IP addresses.  You may need to re-run the `docker-machine env` command.

      $ eval $(docker-machine env)

      $ docker-machine ip
        192.168.99.100

Commands that follow this style are:

    - `docker-machine config`
    - `docker-machine env`
    - `docker-machine inspect`
    - `docker-machine ip`
    - `docker-machine kill`
    - `docker-machine provision`
    - `docker-machine regenerate-certs`
    - `docker-machine restart`
    - `docker-machine ssh`
    - `docker-machine start`
    - `docker-machine status`
    - `docker-machine stop`
    - `docker-machine upgrade`
    - `docker-machine url`

For machines other than default, and commands other than those listed above, you must always specify the name explicitly as an argument.

Unset environment variables in the current shell

You might want to use the current shell to connect to a different Docker Engine. In such scenarios, you have the option to switch the environment for the current shell to talk to different Docker engines.

  1. Run env|grep DOCKER to check whether DOCKER environment variables are set.

    $ env | grep DOCKER
    DOCKER_HOST=tcp://192.168.99.100:2376
    DOCKER_MACHINE_NAME=default
    DOCKER_TLS_VERIFY=1
    DOCKER_CERT_PATH=/Users/<your_username>/.docker/machine/machines/default
    

    If it returns output (as shown in the example), you can unset the DOCKER environment variables.

  2. Use one of two methods to unset DOCKER environment variables in the current shell.

    • Run the unset command on the following DOCKER environment variables.

      unset DOCKER_TLS_VERIFY
      unset DOCKER_CERT_PATH
      unset DOCKER_MACHINE_NAME
      unset DOCKER_HOST
      
    • Alternatively, run a shortcut command docker-machine env -u to show the command you need to run to unset all DOCKER variables:

      $ docker-machine env -u
      unset DOCKER_TLS_VERIFY
      unset DOCKER_HOST
      unset DOCKER_CERT_PATH
      unset DOCKER_MACHINE_NAME
      # Run this command to configure your shell:
      # eval $(docker-machine env -u)
      

      Run eval $(docker-machine env -u) to unset all DOCKER variables in the current shell.

  3. Now, after running either of the above commands, this command should return no output.

     $ env | grep DOCKER
    

    If you are running Docker Desktop for Mac, you can run Docker commands to talk to the Docker Engine installed with that app.

Start local machines on startup

To ensure that the Docker client is automatically configured at the start of each shell session, you can embed eval $(docker-machine env default) in your shell profiles, by adding it to the ~/.bash_profile file or the equivalent configuration file for your shell. However, this fails if a machine called default is not running. You can configure your system to start the default machine automatically. The following example shows how to do this in macOS.

Create a file called com.docker.machine.default.plist in the ~/Library/LaunchAgents/ directory, with the following content:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>EnvironmentVariables</key>
        <dict>
            <key>PATH</key>
            <string>/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin</string>
        </dict>
        <key>Label</key>
        <string>com.docker.machine.default</string>
        <key>ProgramArguments</key>
        <array>
            <string>/usr/local/bin/docker-machine</string>
            <string>start</string>
            <string>default</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
    </dict>
</plist>

You can change the default string above to make this LaunchAgent start a different machine.

Where to go next

machine, virtualbox